ENGINE 41 F. TIMING BELT REMOVAL 1. Remove air filter outlet hose for easy accessibility. 2. Loosen and remove the front timing cover bolts and take out the front timing cover. 3. Remove the AC compressor belt and Power steering pump belt (stretch belt) (for procedure refer AC compressor belt removal procedure in this section). 4. Disconnect electrical connection from cam phase sensor and loosen and remove the bolt of cam phase sensor. 5. Lift the vehicle and remove the stone guard. 6. Lock the flywheel using locking pin (Part no. 2870 5890 06 01) to bring the piston of No.1 cylinder to TDC position. 7. Remove the cam phase sensor and insert the locking pin (Part no. 2653 5890 06 09) for on vehicle ease for locking the camshaft.
RkJQdWJsaXNoZXIy MTIwNTUz