CLUTCH 17 A. CLUTCH PEDAL ASSEMBLY REMOVAL 1. Disconnect battery connection. 2. Pry out the lower cover (1) of steering column. 3. Disconnect the electrical connector (1) from the clutch switch (2). 4. Remove the circlip from the pedal pin (1), pressing the clutch pedal downwards remove the stay rod from the pedal pin and then remove the stay rod (2) with assistance spring (3) and pivot pin from the mounting bracket. 5. Remove the clutch switch mounting brackets by removing the nuts. 6. Remove the spit pin (1) and free the clutch pedal from the clutch master cylinder by removing the clevis pin (2). NOTE The CMC with bayonet adapter is free to remove from the firewall. Hence secure its mounting nuts after removal of clutch switch bracket in order to keep it attached in its place.
RkJQdWJsaXNoZXIy MTIwNTUz