GEAR BOX 6450 33 3. Flip the intermediate plate and assemble the bearing retainer plate on it. 4. Follow the below procedure to assemble the front half housing bearing. A. Install the double row angular bearing of counter shaft in front housing by taping gently. 5. Properly clean the main shaft and hold the main shaft vertically as shown in figure. 6. Place needle cage bearing, slide the 2nd gear sub assembly and triple synchro cone pack on main shaft. Ensure free rotation of Synchro pack. NOTE: Measure the triple synchro cone gap with the help of feeler gauge. Tolerance specification for gap is 1.15 mm to 1.40 mm.
RkJQdWJsaXNoZXIy MTIwNTUz