ENGINE 103 M. Fuel Rail Removal : 1. Remove the engine cover. 2. Loosen and remove 3 fasteners and take out the stuffer assembly with foam. 3. Disconnect fuel rail sensor connector from fuel rail. 4. Disconnect glow plug connection. 5. Disconnect injector electrical connection from injector. 6. Loosen and remove EMS wiring harness mounting screw. 7. Remove HP pipes connected between the common rail and injectors. NOTE After opening the HP pipes cover the opening with suitable caps. Do not reuse the HP pipes once removed, use new at the time of assembly. 8. Loosen and remove nut of fuel pressure line from common rail and the bolt for removing the bracket holding the pipe.
RkJQdWJsaXNoZXIy MTIwNTUz