ENGINE 102 K. Radiator Fan Shroud Removal : 1. Drain the coolant and remove the Coolant tank. (For procedure refer “Coolant Replacement” in Engine Management section) 2. Disconnect the electrical connections to the radiator fan. 3. Press the snap (1) and lift the shroud protrusion (2) by lifting the shroud from the mount (3) which is a part of radiator. 4. Pull out the shroud from the top. Fitment : For fitment slide the shroud into the mounts till it snaps at top mounts. L. Thermostat Removal : 1. Drain the coolant. (Refer “Coolant Replacement” procedure) 2. Access the thermostat either from front right wheel side by removing the arch liner or from top by removing air filter assembly. 3. Remove the spring band clip (1) and disconnect the hose (2). 4. Remove the cover mounting nuts (3). 5. Remove the cover (1) and thermostat (3) from the housing (4). Replace the gasket (2) while refitting. Fitment : For fitment follow the reverse order of removal. Tighten fasteners to the recommended torque.
RkJQdWJsaXNoZXIy MTIwNTUz