ENGINE 90 B. Air Filter Assembly Removal : 1. Disconnect the electrical connections of SIMAF sensor. 2. Disconnect the clamp (1).Loosen and remove the Air filter mounting bolts (2 and 3) and remove the Air filter. 3. Take out the air filter. Fitment : For fitment follow the reverse order of removal. C. Power Steering Pump Belt (Stretch Belt) : The stretch belt used in this vehicle is multi ribbed belt. This belt is pre-tensioned over power steering pump and crank shaft pulleys and therefore do not require the tensioner as this is capable of efficient power transmission. CAUTION The stretch belt is not interchangeable and should not be interchanged with normal Vribbed belts. Stretch Belt Removal: Remove the stretch belt from vehicle using stretch belt removal tool 2702 5890 0623. CAUTION Stretch belt should not be reused. Once removed it should be replaced by new one.. Fitment : 1. Install the new stretch belt on power steering pump pulley. 2. Align the belt with the crank shaft pulley and hold the belt with the mounting tool (Part no. 2702 5890 0622) and rotate the crank shaft pulley clockwise. CAUTION Ensure that the tool is correctly located during the belt fitment process. Make sure that while rotating the crank shaft pulley the belt should not slip away from power steering pump pulley.
RkJQdWJsaXNoZXIy MTIwNTUz