BODY 40 8. Loosen three mounting screws and take out the latch. ASSEMBLY: For assembly follow reverse procedure of removal. H. TAIL GATE I. TAIL GATE REMOVAL: 1. Open the tail gate. 2. Disconnect the tail gate wiring harness located inside the “D” pillar trim and pull out the wiring harness from outside 3. Disconnect the high mounted stop light electrical connection. 4. Remove washer nozzle connection. 5. Pull halfway the metallic clip present on ball pin socket and take out the gas balancer. Follow the same procedure at other end.
RkJQdWJsaXNoZXIy MTIwNTUz