ELECTRICAL 248 4. Average Fuel Consumption: Updates display “Average Fuel consumption” since last reset of Average Fuel consumption data. Average Fuel Consumption display is available in “km/l” or “L/100km” which can be selected by user by using “DIC & Trip” switches Instrument Cluster displays stored “Previous Average Fuel Consumption data” at every Ignition ON. If previous stored data doesn’t exist Instrument Cluster display “0.0” Instrument Cluster starts updating Average Fuel Consumption data when the engine speed is > 0 rpm irrespective of vehicle speed. 5. Range (Distance to Empty): Range (Estimated Distance based on remaining fuel). This feature shows the estimated distance user can drive the vehicle with the remaining fuel in the tank based on the drive pattern. The value is calculated based on fuel economy user have achieved over few hundred kilometers or miles. Instrument Cluster displays “Actual DTE” value (calculates from stored “Previous AVG Fuel Consumption data” & “Present Fuel Volume”) at every Ignition ON and displays “000”, if previous stored Average Fuel consumption data doesn’t exist. This value tends to vary with change in drive pattern, vehicle speed, Traffic condition and different road conditions. 6. OUTSIDE AMBIENT TEMPERATURE: Outside Ambient Temperature can be seen with °C or °F unit, which can be selected by user by using “DIC & Trip” switches The displayed “Outside Ambient Temperature" value may not be accurate when Vehicle speed is ≤ 30 km/h due to engine heat, exhaust from surrounding vehicles and heat reflection from road. The Instrument Cluster delays the Outside Ambient Temperature display update until it reaches the correct outside temperature. This may take several minutes. At outside temperature falls below -1°C “snowflake symbol along with Ice Possible” warning appears in addition to the outside temperature display.
RkJQdWJsaXNoZXIy MTIwNTUz