ELECTRICAL 79 3. Carefully pry out LED holder from illumination ring 4. Press the snaps and pull out the power socket from mounting cutout REFITMENT: 1. Slightly pull out the wiring harness through cut out and connect the electrical connections. 2. Insert the Illuminating ring into cut out provided on the rear power socket. (Snap fitted) 3. Press the power socket into illuminating ring. 4. Fit the power socket. POWER SOCKET ON REAR QUARTER TRIM: REMOVAL: 1. Disconnect the electrical connection. 2. Open the rear quarter trim LH. 3. Carefully pry out the power socket assembly from its illumination ring. 4. Press the snaps and pull out the power socket from the Mounting cutout. REFITMENT: 1. Insert and snap fit power socket into mounting cutout. 2. Fit LED holder to illumination ring 3. Connect the electrical connections SMART USB CHARGER ON REAR OF CENTER CONSOLE: The Smart USB charger with single USB port fitted in the vehicle. The USB charger provides current as per the charging requirement of the connected device with maximum of 2.5 Amps or less. The charger has illumination for night visibility. NOTE: The USB charger availability is dependent on the vehicle variant. This device shall be used only for USB charging. It does not support USB communication.
RkJQdWJsaXNoZXIy MTIwNTUz