ELECTRICAL 78 8.6 POWER SOCKET This can be used for connecting loads (up to 10 Amp maximum) like mobile charger. To use this, open the Cap first. NOTE: Always keep this socket covered with the cap when not in use. LOCATION: In Vehicle three power sockets are provided, one in center console, second on center utility bin and third on rear quarter trim LH (if fitted). POWER SOCKET ON CENTER CONSOLE: REMOVAL: 1. Disconnect the electrical connection. 2. Open the cover of center utility bin. 3. Carefully pry out the power socket assembly from its illumination ring. 4. Press the snaps and pull out the power socket from the Mounting cutout. REFITMENT: 1. Insert the power socket in mounting cutout. 2. Fit LED holder to Power socket illumination ring 3. Connect the electrical connection. 4. Fit the assembly into cutout provided on the tray. (Snap fitted) 4. Press the power socket assemble into illuminating ring. POWER SOCKET ON CENTER UTILITY BIN: It is located on the rear of Center console. REMOVAL: 1. Disconnect the electrical connection. 2. Remove cover of center utility bin.
RkJQdWJsaXNoZXIy MTIwNTUz