BRAKES 53 further loss of fluid and plug the openings with suitable cap. 10. Loosen coupling nuts and disconnect hydraulic lines attached to TMC. 11. Loosen and remove the mounting nuts and remove the TMC assembly from the vehicle. 12. Lastly carefully take out the booster assembly from the engine compartment side. FITMENT For fitment follow reverse procedure of removal. NOTE While assembling the booster ensure that the mounting nuts on the control mounting bracket are tightened with the proper sequence to avoid the vacuum loss. The tightening sequence is given below:
RkJQdWJsaXNoZXIy MTIwNTUz