BRAKES 52 BOOSTER ASSEMBLY. REMOVAL 1. Remove dashboard lower from driver side. 2. Remove Split pin to disconnect brake pedal from brake booster assembly. 3. Remove clevis pin to separate booster assembly from brake pedal. 4. Loosen and remove booster mounting nuts. 5. Position vehicle on two post lift and disconnect battery. 6. Drain the brake fluid from the brake circuit. (For procedure refer brake fluid draining in this section.) 7. Disconnect the electrical connector of brake fluid level switch. 8. Disconnect vacuum hose from brake booster. 9. Remove the spring band clamp at the CMC end and hold the CMC to reservoir connecting hose in vertically upward position to avoid any
RkJQdWJsaXNoZXIy MTIwNTUz