KRYOTEC ENGINE 110 8. Place both camshaft gear in the head cover. 9. Align and match the gear meshing. NOTE Intake camshaft gear consist of two gear with one gear in spring tension. These both need to be aligned in order for gear to mesh properly. 10. Tighten mounting bolts of the cam shaft gear. NOTE Refer “Repair and Inspection Details” section for repair details. 11. Place and install cam shaft head cover on the engine head. NOTE The cylinder head to cylinder head cover centering bushings are longer (16.0 mm) compared to the engine block to cylinder head centering bushings, so be careful not to reverse them as engine damage may occur. 12. Install glow plugs.
RkJQdWJsaXNoZXIy MTIwNTUz