KRYOTEC ENGINE 105 iii. FITMENT OF CYLINDER BLOCK SUBASSEMBLIES Refer “Repair and Inspection Details” section before reusing components. 1. Install the piston cooling nozzles. NOTE Use new gasket while installing. 2. Install all the upper main bearing half shell. 3. Install the Crankshaft into the cylinder block. 4. Install the thrust washer half shell. NOTE Ensure that upper thrust washer notch should be perfectly aligned on cylinder block groove and vertical grooves on the thrust washer should be facing towards crankshaft side. 5. Install all the lower main bearing halves. 6. Tighten main bearing cap mounting bolts gently and uniformly in order as shown to specified torque 7. Apply oil on piston, piston rings, cylinder bore and bearing shells.
RkJQdWJsaXNoZXIy MTIwNTUz