TRANSAXLE 138 4. Screw the three ‘New Screws M6x15’ for fixing on ‘Power Unit Base Plate’ body at the right torque 10 ± 1 Nm. NOTE Oil top up must be done only when diagnostic tool is available. In case of an emergency, remove the vehicle connector and leave for half an hour. If oil level is below minimum level top up oil to the mid of ‘Min and Max’. Don’t reuse the AMT oil once it is drained. 5. Fill the ‘Oil Tank’ with new ‘CS Speed’ oil, at the Max. Level of quantity 0.50 liter@ no pressure in the hydraulic circuit and restore it after the purge procedure. 6. Screw the ‘Oil Tank Cap’ at the right torque 2 ± 0.5/1 Nm.
RkJQdWJsaXNoZXIy MTIwNTUz