TRANSAXLE 54 Complaint Component Causes Remedy 6. Harsh Noise on Declutching A harsh whistling noise can be heard either on declutching or all the time. The movement of the re- lease bearing is hard when rotated by hand. The bearing has seized or was noisy from the start or the bear ing has overheated, burning off the grease caused by incorrect pre-load. Systematically check the linkages, joints fork bearings, preload spring. 7. Permanent Loud Noise Permanent loud noise. The levers are badly damaged and the release bear ing has seized. Incorrect clutch adjustment causing bearing failure. Regular ly check the clutch adjustment . 8. Juddering After Replacing the Clutch The clutch judders after installation of new clutch. Circular grooves can be seen on the fr ict ion material on the flywheel side. The clutch has been replaced when the f lywheel has been previously scored. Systemically check the condition of the fly wheel. Skimming of flywheel may be needed.
RkJQdWJsaXNoZXIy MTIwNTUz