886 HVAC 3. Remove omega clips and disconnect the pipes from heater assembly. 4. Take out heater assembly. Inspection 1. Check heater fins for blockage. If found clogged, use compressed air to clean fins. NOTE: Do not use water to clean the heater. Installation 1. Install heater unit into air distribution housing and tighten three screws. 2. Fix omega clips and connect heater pipes. 2. Remove three screws of heater assembly. HEATER ASSEMBLY Removal 1. Drain engine coolant. (Refer coolant drain procedure/engine cooling system) 3. Tighten two screws of housing cover for heater pipes. 4. Topup engine coolant.
RkJQdWJsaXNoZXIy MTIwNTUz