HVAC 861 HVAC (b) While installing a New Compressor Compressor oil is sealed in each New Compressor (1) by the amount required for air conditioning cycle. Therefore, when using a New Compressor for replacement, drain oil from the New Compressor by the amount calculated as follows. “ C ” = “A” - ”B” “ C ” = Amount of oil to be drained “ A ” = Amount of oil sealed in a new compressor “ B ” = Amount of oil remaining in removed compressor (2) NOTE: As it is necessary to replenish oil by approximately the same amount which is remaining in old compressor, draining of oil from the New Compressor becomes necessary. Following table illustrates the amount of oil to be replenished for respective HVAC / A/C components Replaced Amount of compressor oil part to be replenished Evaporator 30 CC Condenser 15 CC Hoses 10 CC each Pipes 10 CC each
RkJQdWJsaXNoZXIy MTIwNTUz