BODY 789 BODY REAR SHELF Removal 1. Pull the strip (located behind the rear seat) up to unfold the seat. (Repeat same procedure for other side). Installation 1. Align rear shelf and tighten six bolts. 2. Push back the seat to its normal position. 2. Remove the wing nuts and take out rear shelf. Installation 1. Align the tailgate on body and tighten four mounting bolts to specified torque. TIGHTENING TORQUE FOR TAILGATE BOLTS = 1 Kg-m NOTE : Proper handling is required while aligning the tailgate. 2. Fit rear shelf. (Refer rear shelf installation procedure) TAILGATE 1. Remove rear shelf. (Refer rear shelf removal procedure) 2. Remove four mounting bolts securing tail gate assembly to the body and take out the tail gate assembly. (Each two bolts are located on either side of tailgate).
RkJQdWJsaXNoZXIy MTIwNTUz