788 BODY 2. Also adjust door striker screws so as to align the door with the body. NOTE : After setting procedure, ensure that there is uniform gap between door and body and also, door opens and closes properly. Installation 1. Align the door on to the hinges and tighten four mounting bolts to specified torque. TIGHTENING TORQUE FORDOORMOUNTING BOLTS = 2.5 Kg-m 2. Connect the electrical connector. REAR DOOR ASSEMBLY Removal 1. Disconnect the electrical connector. Remove four bolts securing door to the body. Lift the door vertically and take it out. DOOR SETTING PROCEDURE After installation of door assembly, it may require to perform a door setting procedure for proper alignment. 1. Adjust the bolts so as to align door with the body. (As shown by circles)
RkJQdWJsaXNoZXIy MTIwNTUz