BODY 765 BODY HOOD, HOOD LATCH, HOOD LATCH CABLE AND HOOD STRIKER HOOD Removal NOTE : Before removing mounting screws of hood, do the markings on hood so that while refitting, the alignment of the hood will not change. 1. Remove mounting screws securing hood to the hood hinges. 2. Remove the stay rod from the bracket and take out the hood. Installation 1. Locate the hood on the hinges and match the markings. 2. Tighten four mounting screws of hood to specified torque. TIGHTENING TORQUE FOR HOOD SCREWS= 1 Kg-m NOTE : Ensure that there is a uniform gap between the hood and body. If not so, recheck and adjust the alignment of hood with the markings.
RkJQdWJsaXNoZXIy MTIwNTUz