550 BRAKE SYSTEM PARKING BRAKE CABLE Removal: 1. Release parking brake. 2. Unscrew parking brake adjustment nut (a) and disengage the parking brake cable from parking brake equalizer (b). 3. Remove clip securing parking brake cable to the brake back plate and disconnect parking brake cable from brake back plate. a b PARKING BRAKE LEVER NOTE: Refer above figure for the sequence of removal process. 1. Remove the parking brake adjustment nut and remove the equalizer and the central locator from the parking brake lever. 2. Disconnect the electrical connection of parking brake switch attached to parking brake lever. 3. Unscrew the parking brake lever mounting bolts and take out the lever. Installation 1. Align parking brake lever on mounting bracket and tighten three mounting bolts to specified torque. TIGHTENINGTORQUE FORPARKINGBRAKE LEVER MOUNTING BOLTS = 0.8 - 1 Kg-m. 2. Insert the parking brake cable through equalizer and tighten parking brake adjustment nut as per requirement. (Refer parking brake cable adjustment procedure) 3. Connect park brake switch electrical connector. 4. Check rear brakes for dragging and proper functioning of parking brake. NOTE: Check parking brake cable end rotates freely on equalizer. 1 3 2 Removal:
RkJQdWJsaXNoZXIy MTIwNTUz