SUSPENSION SYSTEM 459 SUSPENSION SEMI-TRAILING ARM NOTE: Refer exploded view of Rear Suspension Components for removal and installation process Removal 1. Remove wheel(s) (Refer wheel removal procedure/ Wheels and Tires group) 2. Remove wheel hub cover (c), wheel lock nut (b) and thrust washer (a) . NOTE: Before loosening a coupling nut, attach a transparent (vinyl) bleed tube to the bleed screw and loosen the same to 3/4th turn. Pump out the brake fluid in a suitable container by operating the brake pedal. 3. Remove the brake hose clip mounted on the semi trailing. 4. Unscrew the brake line coupling nut. b c a 5. Support the semi trailing (01) arm (as shown below by arrow in fig. given below) so that: (a) It will keep the semi trailing arm from flying downward when the shock absorber is unbolted. (b) Drive shaft angles are not exceeded.
RkJQdWJsaXNoZXIy MTIwNTUz