404 DRIVETRAIN B. GEAR SHIFTERADJUSTMENT (Selector cable) NOTE: Only selector cable can be adjusted. 1. Remove the Gear shifter console, for procedure refer Body group GEAR CONSOLE REMOVAL ANDFITMENT. 2. Keep the gear lever in neutral position and pull out the lock such as to free the cable adjuster slot to move. 3. Keep the gear lever in vertically upright position and adjust the slot such that there is no slack in the selector cable. 4. After adjustment press the lock back into its position. 7. Pull out the projected pull and release the cable from the cable anchoring bracket by lifting it. 8. Loosen the fuel tank mounting bolts. 9. Remove the cables along with grommet from the engine compartment side and free it from the clamping brackets. Fitment: Follow the reverse order of the removal process for fitment and adjust the shifter cable for vertical position of the shifter lever. For procedure refer next section.
RkJQdWJsaXNoZXIy MTIwNTUz