AIR CONDITIONING 15 11.5.10 SERVICING OF CONDENSER REMOVAL: 1. Remove the front bumper and splash guard – Refer removal and refitment of front bumper) 2. Remove the condenser radiator assembly from the assembly front end module in vehicle ( refer the engine cooling system ) 3. Loosen and remove the condenser from the radiator assembly. REFITMENT: 1. Tighten the condenser to the radiator assembly. 2. Fix the condenser radiator assembly to the front end module (Refer the Engine cooling System). 3. Refit the front bumper and splash guard – Refer removal and refitment of front bumper. CONDENSER CARTRIDGE: REMOVAL: 1. Remove bottom snap from projection provided on komo profile and push frame in arrow direction 1by hand. (Fig. 22) 2. Push middle snap in arrow direction 2 to remove plastic frame from condenser. 3. Remove retaining ring from bottom side of condenser by inserting the plier teeth in holes and press inside to remove from groove where it is placed (as shown below). (Fig 24A & 24B)
RkJQdWJsaXNoZXIy MTIwNTUz