Automated Manual Transmission 56 Hydraulic Selection Gearbox Input Shaft Speed Sensor Removal 1. Place the car on a lift. 2. Remove Protection/guard under engine. 3. Disconnect the electrical connection for the electro hydraulic selection gearbox input shaft speed sensor. Sr. No Name Connector 1 Gearbox input speed sensor Transmission output speed sensor 4. Loosen and remove the electro-hydraulic selection gearbox input shaft speed sensor. Hydraulic Selection Gearbox Input Shaft Speed Sensor Fitment 1. Place the electro-hydraulic selection gearbox input shaft speed sensor in its housing and tighten it. 2. Connect the electrical connection for the electro-hydraulic selection gearbox input shaft speed sensor. 3. Fit Protection/guard under engine. 4. Remove the car from the lift. Electro-Hydraulic Selection Gearbox Wiring Mounting Bracket Removal 1. Remove battery. 2. Remove battery support/drip tray. 3. Open the clip and release the wiring. 4. Using a suitable tool, remove the rivets (2a) and the electro-hydraulic selection gearbox wiring mounting bracket (2b).
RkJQdWJsaXNoZXIy MTIwNTUz