Automated Manual Transmission 53 Hydraulic Selection Gearbox Shift Position Sensor Removal 1. Place the car on a lift. 2. Position the gear lever at N. 3. Connect the diagnosis equipment and carry out the accumulator depressurization procedure. 4. Remove protection/guard under engine. 5. Remove battery. 6. Remove battery support/drip tray. 7. Remove wiring for manual gearbox hydraulic selection system on hydraulic selection unit 8. Remove hydraulic speed selection hydraulic actuator unit and clutch. 9. Loosen and remove the screws and remove the electro-hydraulic selection gearbox gear engagement position sensor. 10. Remove the driver complete with O-ring. Hydraulic Selection Gearbox Shift Position Sensor Fitment 1. Place the driver (1a) back in its housing, complete with O-ring, taking care to attach the pin (1b) with the fork (1c). 2. Place the electro-hydraulic selection gearbox gear engagement position sensor in its housing, inserting the pin (1b) in the Sensor (1a).
RkJQdWJsaXNoZXIy MTIwNTUz