Automated Manual Transmission 39 Hydraulic Unit/Electro hydraulic Selection Gearbox Electric Pump Assembly with Gearbox Removed Removal: 1. Loosen the band and disconnect the return pipe from solenoid valve unit to reservoir, solenoid valve unit side. 2. Loosen the connector for the pipe from electric pump to solenoid valve unit, solenoid valve unit side. 1. Raise the retaining clip (1a) and disconnect the pipe from hydraulic unit to clutch release actuator (1b), hydraulic unit side, complete with O-rings. 1. Disconnect the electrical connection for the gearbox input speed sensor. 1. Disconnect the electrical connection from the oil pressure sensor. 2. Release the wiring from the retaining clip. 1. Loosen the screw (1a) and remove the protective cover (1b). 1. Rotate the gear selection actuator anticlockwise by 90°. 1. Loosen the screws (1a) and remove the solenoid valve unit (1b).
RkJQdWJsaXNoZXIy MTIwNTUz