Automated Manual Transmission 31 Electro hydraulic Selection Gearbox Activation Hydraulic Unit Mounting Removal: Place the car on a lift. Position the gear lever at N. Connect the diagnosis equipment and carry out the accumulator depressurisation procedure. Remove the Protection / guard under engine. Disconnect the Battery and remove the battery support and tray along with Battery. Remove the electrical wiring harness from the gearbox hydraulic selection system on hydraulic selection unit. Remove the hydraulic speed selection hydraulic actuator unit and clutch Loosen the screw (1a) and remove the gear selection dog (1b). Loosen the screws (1a) and remove the mounting for the gearbox electro-hydraulic selection system hydraulic actuation unit (1b). Remove the O-ring from the mounting for the gearbox electro-hydraulic selection system hydraulic actuation unit.
RkJQdWJsaXNoZXIy MTIwNTUz