DRIVETRAIN C549 30 12. Remove the 1st-2nd speed drive rod (1a) together with the fork (1b). NOTE: If the rod offers resistance during the Extraction, the other rods (2a) and (3a) must be adjusted to move the selectors (4) and (2b). 13. Remove the 3rd-4th speed drive rod (2a). NOTE: Work carefully to prevent the pawl (2b) from accidentally coming out. 14. Simultaneously remove 5th-reverse gear drive rod (3a) and 3rd-4th speed fork (3b). 15. Remove the two gear engagement safety pawls (4). 16. Remove the main and lay shaft assemblies (1) at the same time. 17. Remove the reverse idler gear (2). 18. Remove the lay shaft front bearing (3). 19. Remove the differential assembly (4). 20. Remove the magnet (5). NOTE: The overhaul procedure of differential assembly is separately mentioned in detail under the head ‘DIFFERENTIAL ASSEMBLY – OVER- HAUL’. 21. Remove the engine side oil seal for the manual TRANSAXLE bell housing. 22. Unscrew the gear control selector bolt. 23. Remove the pin (2a) using a suitable drift and remove the gear selector (2b).
RkJQdWJsaXNoZXIy MTIwNTUz