DRIVETRAIN C549 29 C. REMOVAL OF SHAFTS, CONTROL RODS AND DIFFRENTIAL 1. Remove the main and lay shaft rear bearing circlips (1). 2. Unscrew the plugs (1) for positioning the gear control rods. 3. Unscrew the reverse shaft fixing bolt (2). 4. Unscrew the reversing light switch (3). 5. Unscrew the fixing bolts and remove the differential flange (1a) complete with O-ring (1b), oil seal (1c) and scraper ring (1d). 6. Unscrew the bolts (1) fixing the TRANSAXLE casing to the manual TRANSAXLE and engine support. 7. Position the gear elector/engagement lever (2) downwards. 8. Remove the TRANSAXLE casing (3) using two Screwdrivers for leverage by the special projections provided on housings. 9. Unscrew the bolts (1a) and remove the reverse fork mounting bracket (1b). 10. Unscrew the 3rd-4th speed fork screw (2). 11. Unscrew the 1st-2nd speed drive fork bolt (3).
RkJQdWJsaXNoZXIy MTIwNTUz