SUSPENSION 29 10.Unstake and unscrew drive shaft nut and take out the thrust washer. 11.Remove holder from the hub assembly. a) Remove the caliper housing from the knuckle. . b) Unscrew the disc holding screws and remove the disc. 12.Unscrew the sensor mounting screw and remove the sensor (if applicable) 13.Pull out the hub with the help of puller part No. 2702 5890 3302 and striker part No. 2702 5890 3304 14.Remove puller from the hub. 15.Remove ball joint of lower arm from the Knuckle. 16. Remove strut mounting bottom bolts from the knuckle assembly by supporting the drive shaft 17.Using clamp part No. 2779 5890 3303 puller part No. 2654 5890 3508 and rest part No. 2702 5890 2612 remove inner race of bearing from the hub
RkJQdWJsaXNoZXIy MTIwNTUz