TRANSAXLE TA6300 49 ASSEMBLY: 1. Refit the selector shifter cable over the transaxle bell crank lever and assembly selector shifter shaft end 2. Pull and hold the plunger of the transaxle cable. Then snap fit the cables over the transaxle cable-anchoring bracket. 3. Insert the cable through the firewall and tighten its mounting on it. 4. Position and tighten the assembly gearshift housing on the cab floor. 5. Refit the selector and shifter cable lock on the assembly gear shift housing. 6. Fix the selector cable on the assembly gear shifter housing and leave the yellow clip partially open. 7. Fit the selector cable end on select lever ball. 8. Press the yellow clip of the selector cable. 9. Place the center console over the assembly and assemble it. 10. Then fix bellow and gearshift lever knob.
RkJQdWJsaXNoZXIy MTIwNTUz