FATC 24 D. EVAPORATOR SENSOR It is a temperature-sensing device, which is positioned at the coldest point of the evaporator (as shown in the fig below). The control unit switches OFF the compressor at a temperature when condensed water tends to form ice on the fins of evaporator. Thus, it maintains the evaporator temperature within a specified range. LOCATION It is mounted on Air intake / Evaporator housing assembly. PIN OUT PIN DETAILS PIN NO DESCRIPTION 01 Temperature out to control panel 02 Ground NOTE Refer Evaporator sensor removal and installation process from On Vehicle repairs in HVAC. E. MODE ACTUATOR. The actuator operates this flap in order to control the airflow direction from the HVAC unit. E.g., Face, Foot, Defrost etc. NOTE: The actuators used to operate the doors are similar and can be interchanged. LOCATION PINOUT PIN NO DESCRIPTION 1 -ve (Ground) 2 feedback potentiometer 3 +ve 4 Not Used 5 +ve for CW & -ve for CCW 6 -ve for CW & +ve for CCW
RkJQdWJsaXNoZXIy MTIwNTUz