BODY 21 32.Remove PAB Assembly (If applicable). (For procedure follow the steps as mentioned in dash board skin removal). 33.Remove solar load sensor. (if applicable) (For procedure follow the steps as mentioned in HVAC section). 34.Remove the Dashboard skin. (For procedure follow the steps as mentioned in dash board skin removal). 35.Remove the PDC unit on the CCB. (For procedure follow the steps as mentioned in Electrical Section). 36.Remove the Cabin fuse and relay unit. (For procedure follow the steps as mentioned in Electrical Section). 37.Remove the window winding module. (For procedure follow the steps as mentioned in Electrical Section). 38.Remove the wiring harness fitted on CCB. 9.2.5 GLOVE BOX REMOVAL 1. Open the glove box and pry out AC adaptor top Utility Bin. 2. Remove glove box damper pin. 3. Rotate glove box assembly with 50 in downward direction and pull out from hinges.
RkJQdWJsaXNoZXIy MTIwNTUz