SUSPENSION 1 1. TECHNICAL SPECIFICATIONS AND TIGHTENING TORQUES 1.1. SPECIFICATIONS: (A) Front Suspension Type: Independent, lower wishbone, McPherson strut type with anti roll bar at front. (B) Rear Suspension Type: Semi-Independent; closed profile Twist beam with Dual path Strut. (C) Wheels and Tyres Tyres: 175/65 R14 82T & 155/80 R13 79T Tubeless tyre & 175/60 R15 81H Tubeless tyre Tyre geometry: A tyre of size 175/65 R14 82T is made up of following information: 175 - Tyre section width in millimeters 65 - Aspect ratio in % (the height of the side wall divided by the tyre’s width) R - Tyre’s construction type - in this case it’s a radial type 14 - Rim diameter in inches 82T - Service description (Load Index + Speed Symbol) Tyre pressure: Tyre Size Vehicle Version Wheels Tyre Pressure 175/65 R14 & 155/80 R13 Petrol Front 33 psi (2.3 bar) Rear 30 psi (2.1 bar) Spare 36 psi (2.5 bar) Diesel Front 33 – 36 psi (2.3 – 2.5 bar) Rear 30psi (2.1 bar) Spare 36 psi (2.5 bar) 175/60 R15 Petrol Front 36 psi (2.48 bar) Rear 36 psi (2.48 bar) Spare 36 psi (2.5 bar) NOTE: “Tyre Inflation pressure varies between different variants. Refer Pressure sticker for correct Inflation pressure". Wheel Rims: 5J X 14” Alloy/ Steel rims & 4.5 J X 13” Steel rims & 5.5J X 15” Alloy/ Steel rims (D) Steering geometry (In unladen condition) Front Rear Toe - in Not applicable 12' ± 15' (Fixed) Toe - out 0 - 13' Not applicable Camber angle 30' ± 30' -52' ± 60' (Fixed) Caster angle 1° 45’± 45' Not applicable King pin angle 12.8° Not applicable
RkJQdWJsaXNoZXIy MTIwNTUz