1.05L REVOTORQ ENGINE 130 ii. FITMENT OF PISTON AND CONNECTING ROD SUB-ASSEMBLIES : 1. Fit Piston Oil Ring (1), Piston Second Ring (2) and Piston Top Ring (3) respectively as shown. CAUTION The piston ring gap should not be inline with each other while assembling on piston. Place the piston rings on the piston, such that the ring gaps are 1200 apart. 2. Install the Connecting Rod and Insert Piston Pin. NOTE Ensure connecting rod notch is on the piston skirt groove side while assembling the piston connecting rod assembly. 3. Install Piston Pin Circlip from both side of Piston Pin.
RkJQdWJsaXNoZXIy MTIwNTUz