1.05L REVOTORQ ENGINE 129 B. ENGINE ASSEMBLY : i. FITMENT OF CYLINDER HEAD SUBASSEMBLIES : 1. Fit the valve guide seal with the help of special tool. SPECIAL TOOL Drift (Valve Guide Intake / Exhaust) -: 2868 5890 06 05 Spacer for fitment of Valve Guide along with Drift - 2868 5890 06 06 2. Fit inlet and exhaust valve from bottom side. 3. Lubricate the valve stem and guide. 4. Fit the valve seats, valve retainers and using special tool compress the valve springs and place the spring lock halves. SPECIAL TOOL Valve Spring Compressor -: 2868 5890 06 02 5. The lock halves hold the spring retainer in place when relieving pressure applied by the spring compressor. 6. Repeat the same procedure for all valves. 7. Install the roller finger follower and hydraulic lash adjuster assemblies.
RkJQdWJsaXNoZXIy MTIwNTUz