TIGOR EV SERVICE MANUAL

SUSPENSION 32 NOTE:  Ensure mounting surfaces of bearing on steer- ing knuckle and hub should be free from dust, rust, foreign particles, oil and grease etc prior to assembly.  Handle bearing with clean, dry hands and never use hand glove while assembling.  Never hammer the bearing while assembly and removal.  No damages to bearing is permitted.  During pressing the bearing into knuckle, en- sure marking to be at inboard Side of vehicle. 9.4. REMOVAL AND INSTALLATION OF ANTI ROLL BAR:  REMOVAL: 1. Loosen & Remove the Stab link mounting form the antiroll bar. 2. Loosen & Remove the LH / RH side mounting form the body of antiroll bar & Take out the anti- roll bar.