TIGOR EV SERVICE MANUAL

SUSPENSION 30 14. Unscrew the sensor mounting screw and re- move the sensor (if applicable). 15. Pull out the hub with the help of puller part No. 2702 5890 3302 and striker part No. 2702 5890 3304. 16. Remove puller from the hub. 17. Remove ball joint of lower arm from the Knuckle. 18. Remove strut bottom mounting bolts 1 from the knuckle assembly 2 by supporting the drive shaft. 19. Using clamp (1) part No. 2779 5890 3303 puller (2) part No. 2654 5890 3508 and rest pad (3) part No. 2702 5890 2612 remove inner race of bearing from the hub. 20. Remove circlip from knuckle. 21. Pull out knuckle bearing using puller part No. 2779 5890 3302.