ALTROZ SERVICE MANUAL

SUSPENSION 40 14.Remove four cap screw. 15.Remove mounting screw from Gen-3 bearing Mount & take out Gen 3 bearing. 16.Remove the back plate along with brake shoe assembly. 17. Remove the shock absorber lower bolts and coil springs. (Refer removal and refitment of shock absorber and coil springs). 18. Remove the twist beam cross bolt by unscrewing nuts of LH & RH side. 19. Lower the twist beam with proper support stand. 20.Remove twist beam front pivot bush using special tools. NOTE:  Apply soap water to the bush and the bore of twist beam assembly before installation.  Tightening of RTB on body. No jacking to be done on beam, avoid oil based lubricant while pushing the bushes in eye.