NEXON BSVI MCE - SERVICE MANUAL

HVAC 50 vi. TXV The TXV for HVAC is located on the firewall in the engine compartment. REMOVAL OF TXV 1. Discharge the refrigerant using standard recover- ing equipment. 2. Loosen and remove bolts and disconnect the inlet and outlet lines i.e. high pressure line and low pressure line. 3. Loosen and remove the Allen screws of size-4 and remove the TXV from the HVAC unit. vii. PRESSURE SENSOR / SWITCH PETROL 1. Discharge the refrigerant using standard recover- ing equipment. 2. Remove the Front Bumper.(Refer Exterior sec- tion) 3. Disconnect electrical connector. 4. Loosen & remove pressure switch. DIESEL 1. Discharge the refrigerant using standard recov- ering equipment. 2. Remove wiper arms & wiper motor. (Refer elec- trical section) . 3. Remove leaf screen (Refer body section) . 4. Remove plenum (Refer body section) . 5. Disconnect electrical connector. 6. Loosen & remove pressure switch. FITMENT For fitment, follow reverse procedure of removal.