NEXON BSVI MCE - SERVICE MANUAL

BRAKES 38 13.2. REMOVAL OF FRONT BRAKE DISC 1. Position the vehicle on two-post lift and remove front wheel/s by removing wheel mounting banjo nuts. 2. Remove two bolts of brake caliper assembly. Release caliper assembly and tie aside clear off from brake disc. CAUTION: Do not allow caliper to hang on brake hose as it may damage the hose. 3. Remove brake disc screws (02 nos.) securing brake disc to the hub. 4. Pull off the brake disc. INSPECTION Refer Maintenance, Adjustment and Test for Brake Disc inspection. INSTALLATION 1. Clean mating faces of hub and new brake disc. 2. Mount brake disc onto hub and tighten two screws to specified torque (0.6 – 0.8 Kg-m) 3. Install the caliper assembly to the steering knuckle and tighten two bolts to specified torque (7.0 – 8.0 Kg-m) 4. Tighten wheel mounting nuts to specified torque (7.9 – 8.1 Kg-m) and fit wheel/s.