NEXON BSVI MCE - SERVICE MANUAL

SUSPENSION 34 9.4.3. REMOVAL OF LOWER ARM RUBBER BUSHES A. Lower arm front pivot bush Removal: 1. Remove front pivot bush using special tools as shown in below arrangement. NOTE: Apply soap and water to the bush, the inner surface of the tool and the bore of assembly lower link before installation. Installation: 1. Install pivot arm bush using special tools as shown in below arrangement. NOTE: Load should be applied concentric to the bush axis to avoid improper fitting of bush into the housing. B. Lower arm Rear pivot bush Removal: 1 . Remove rear pivot bush using special tools as shown in below arrangement. NOTE: Apply soap and water to the bush, the inner surface of the tool and the bore of assembly lower link before installation. Installation: 2. Install rear pivot bush using special tools as shown in below arrangement.