NEXON BSVI MCE - SERVICE MANUAL

SUSPENSION 30 3. Ensure that oil seal in transaxle is not damaged while fitting drive shaft. PRECAUTION: Use a new hub bearing and new circlip, oil the bearing housing in knuckle carrier and hub itself. Old bearing, even if serviceable cannot be reused. SUB ASSEMBLY - KNUCKLE / HUB: Clean all the parts thoroughly and replace damage / worn out parts. 1. With the help of drift part No. 2779 5890 3301 and 2640 5890 3511 fit bearing in the knuckle 2. Fit circlip. 3. Place the knuckle assembly over the hub. Using drift part No. 2576 5890 4401 press the knuckle assembly on the hub.