NEXON BSVI MCE - SERVICE MANUAL

SUSPENSION 6 3. TIGHTENING TORQUES NOTE: Unless otherwise specified, no oil/lubricant/thread locker allowed on fastener, fastener bearing surface or surface where the fastener will sit while assembly. All self-locking type fasteners not to be re-used once joint is dismantled. All fasteners to be paint marked after torque tightening is applied. * MARKED BOLTS TO BE TIGHTEN IN PRE-LOADING CONDITIONS . SR. NO. DESCRIPTION FASTNER TYPE TORQUE VALUE (Kg-m) LOCATION FRONT SUSPENSION 1. FRONT STRUT MOUNTING ON KNUCKLE M12X1.25 14 2. Strut top mounting NYLOC NUT M8 2.3 3 Driveshaft lock nut LOCK NUT 24.5 ± 1.5 4 Sub frame mounting bolts(at 4 corners) M14x1.25 19