NEXON BSVI MCE - SERVICE MANUAL

1.5L REVOTORQ BS VI ENGINE 99 27. Disconnect the fuel lines and back leak hose and them set aside. 28. Disconnect the gear shift cable and selector cable from the transaxle. 29. Disconnect the hydraulic clutch high pressure line from the transaxle slave cylinder. 30. Remove the splash guard. ( Refer Body section for procedure ) . 31. Remove both front tyres. 32. Remove the left and right drive shafts from the vehicle. (For removal procedures refer Transaxle section). 33. Use suitable belt/chain to fix a zip crane to the engine lifting hooks located at front and rear of the engine. 34. Raise the crane slightly up until very light pressure is applied to the engine. 35. Loosen and remove the 2 mounting nuts and one bolt on engine 'B' mount assembly.