NEXON BSVI MCE - SERVICE MANUAL

1.5L REVOTORQ ENGINE 56 v. FUEL FILTER REPLACEMENT WARNING  If diesel leakage is detected, do not start the vehicle or allow an open flame or spark near the vehicle. Have the fuel leak repaired immediately.  The fuel system is under pressure. Relieve fuel system pressure before replacing the filter DESCRIPTION The fuel filter is mounted on transaxle on the front side in the vehicle. A band clamp secures the fuel filter in place. Replace the fuel filter as per service schedule. When the vehicle is operated in adverse conditions or where fuel quality is questionable, more frequent replacement may be necessary. REMOVAL 1. Relieve fuel system pressure by removing the power supply to the system fuel pump and cranking the engine. 2. Disconnect the negative (-) battery cable. 3. Remove the fuel line connections (Quick fit Connectors) to the fuel filter. 4. Disconnect the electrical connection to the fuel filter. 5. Push the fuel filter in upward direction and take it out from the groove in mounting bracket. INSTALLATION 1. Place the fuel filter in the mounting bracket. Be sure to orient the fuel filter in the proper direction. 2. Press the fuel filter in downward direction and fit it on the groove in mounting bracket. 3. Connect the fuel lines to the filter, making sure the lines are secure. 4. Lower down the vehicle from hoist 5. Start the engine and inspect the connections for leaks. Stop the engine immediately and repair if any leaks.