NEXON BSVI MCE - SERVICE MANUAL

1.2L REVOTRON ENGINE 92 30. Raise the crane slightly up until very light pressure is applied to the engine. 31. Remove the mounting of the Engine 'B' mounting bracket. 32. Remove the Engine A-mount arm mounting nuts (3 nos) from engine side. 33. Remove the Engine “C” mount by removing the mounting bolts. 34. Now move the two post lift upwards and place the support stand under the engine. (Use a suitable wooden block or other support for additional height as necessary). SPECIAL TOOL  Engine Support stand -: 5424 5890 24 01 35. Now slightly lower the lift until engine and transaxle assembly is securely placed / fix on the support stand. 36. Disconnect the lifting crane from the engine. CAUTION  Use care when raising the vehicle off the engine and transaxle assembly. Verify all components and electrical connections are disconnected prior to raising the vehicle, or vehicle damage occur. 37. Now carefully move the lift up. 38. Take out the engine and transaxle assembly along with support stand. 39. Remove the starter motor, alternator along with its mounting brackets. 40. Remove the transaxle from the engine. 41. Fix the LH & RH mounting brackets to the engine. SPECIAL TOOL  LH Mounting Bracket -: 5424 5890 24 03  RH Mounting Bracket -: 5424 5890 24 02 42. Safely lift the engine with the help of crane and fix it on overhaul stand.