TATA PUNCH-SERVICE MANUAL

ELECTRICAL 38 10.12. REAR SHOCK ABSORBER AND COIL SPRING ASSEMBLY: 1. Refit the shock absorber top mounting fasteners with new nyloc nut in the luggage compartment and tighten to 2.5 to 3 kg-m Torque. 2. Fit and rotate the top rubber with the coil spring. LH Spring Orientation RH Spring Orientation 3. Position the spring bottom rubber pad to be fixed to twist beam in two holes. Spring to be oriented such that end rest and against the stopper of bottom rubber pad. 4. Raise the torsion beam using hydraulic jack so that the coil spring gets compressed and shock absorber sits exactly over torsion beam properly. 5. Refit the Rear Shock Absorber Bottom Fastener & apply torque. (As per torque table). 6. Refit the rear wheels. 7. Remove the Car from 2 Post Lift.